July 1, 2020

Dakota Gasification in North Dakota, was in need of a bearing isolator that could contain oil mist within the bearing housing of their Wilson Snyder

January 15, 2020

the bearing housings has issues with water vapor ingress. Isomag magnetic bearing isolators are a positive seal and will hold oil in, and keep

January 14, 2020

Isomag magnetic bearing isolators stop water and condensate from contaminating your turbine oil. Isomag bearing seals utilize proven...

November 22, 2019

Isomag developed the V8 bearing seal with the cutter flange to provide a solution to this problem for all customers in the Pulp and Paper industry...

November 7, 2019

have found Isomag bearing seals to be their best solution for meeting and exceeding their maintenance lifecycle goals. As the pioneers in the ...

November 6, 2019

Isomag seals reliably regardless of the gearboxes orientation: horizontal, vertical-up or vertical-down. Where lip seal’s see an average...

October 29, 2019

put an end to this issue by replacing the existing labyrinth isolators with Isomag bearing seals. Since installed in 2015, the end user reports that...

October 28, 2019

In 2014, Moores Pump and Services approaches Isomag with a very unique application. The Cornell 2.5 DA-1 cavitation pump, was a pump used on the Gulf Coast oil platforms to pump air and water into the ground. The pump was unique due to its need to seal the bearing hous...

October 25, 2019

customers from International Paper, West Rock, & Domtar Paper to Shell and Chemours have found Isomag bearing seals to be their best solution..

October 24, 2019

The customer requested two things of Isomag bearing isolators, stop the egress of oil, and have a seal that will last the maintenance life cycle goal.

Please reload

Featured Posts

BASF Chemical Plant

October 22, 2016

Please reload

Recent Posts
Please reload